Stanley SPL3 User Manual

Please read these instructions before operating the product
Lea estas instrucciones antes de operar el producto
Bien lire ces instructions avant d’utiliser le produit.
Por favor, leia estas instruções antes de operar o produto
SPL3
3- Beam Self-Levelling Spot Laser
Láser puntual con autonivelación de 3 rayos
Laser ponctuel autonivelant à 3 faisceaux
Laser de Ponto Autonivelante de 3- Feixes
STHT77342
Self-Levelling
Autonivelación
Autonivelant
Autonivelante
ENGLISH
FRANÇAIS
ESPANOL
português

Stanley SPL3 Specifications

General

Laser Class	Class II
Accuracy	±1/8 inch at 30 feet
Self-Leveling Range	±4 degrees
Laser Diode	635nm
Batteries	3
Battery Type	AA
Outdoor Use	Yes, with detector

Summary

User Safety

General Safety Precautions

Read instructions, avoid eye exposure, and understand safety glasses usage.

Keypad, Modes, and LED

Keypad and Power Switch

Laser Beam Modes

LED Indicator Function

Batteries and Power

Battery Installation and Removal

Provides instructions for installing and removing AA batteries, emphasizing correct orientation and type.

Set Up

Laser Tool Placement

Mounting on Accessories

Operation

Power Control

Mode and Self-Leveling

Accuracy Check and Calibration

Up and Down Plumb Beam Accuracy

Describes how to measure and compare plumb beam accuracy against specified tolerances.

Level Beam Accuracy

Horizontal Beam Accuracy Measurement

Details steps to measure and compare horizontal beam accuracy against specified tolerances.

Specifications

Laser Tool Specifications

Provides detailed technical specifications for the SPL3 laser tool, including accuracy and operating conditions.