Need help?Do you have a question about the Stanley IntelliLaser Pro and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Type | AA |
| Laser Wavelength | 635 nm |
| Self-Leveling Range | +/- 4 degrees |
| Self-Leveling | Yes |
| Warranty | 1 year |
| Accuracy | +/- 1/8 inch at 30 feet |
| Battery Life | Up to 20 hours |
| Outdoor Use | Yes, with detector |
Follow warnings to avoid injury, do not remove labels, avoid direct eye exposure to laser beam.
Instructions for replacing the 9-volt battery or AAA batteries in the unit.
Steps for applying and removing the adhesive pad for the laser pod to surfaces.
Procedure for calibrating the unit on a wall before scanning for studs.
How to select depth detection and detect wood or metal studs using the sensor.
How to use the live wire detection feature and its limitations.
Precautions for working near wiring, studs, joists, and different wall materials.
Information on how to use and control the laser plane feature.
Tips for proper operation, including safety notice for live wire detection.
Guidance on adjusting depth settings for better stud detection accuracy.
How different surface types like wallpaper or textured surfaces affect performance.
To Next Page
