–13–
Specifications
Utilizing the procedure of scanning and marking from
two sides, Intelli
LLaasseerr
™
PPrroo
will find the stud center
with 1/8” accuracy for wood and 1/4” accuracy for
metal.
When measuring a wood or metal stud, it is
recommended the IntelliSensor
™
to be used at 20-35%
relative humidity.
Battery (not included):
Main unit: (1) 9 volt
Laser pod: (2) AAA
Shock Resistance: up to 3 feet
Operating Temperature: +20
°F to +120°F
(-7°C to +49°C)
Storage Temperature: -20°F to +150°F
(-29°C to +66°C)
Laser diode: 650nm Class IIIA (U.S. version) or
635nm Class 2M (Europe version)
Laser accuracy: 1/2” at 20 feet
Length of projected Laser Line: up to 20 feet
This is a Class IIIA (U.S. version) or 2M (Europe version)
laser tool and is manufactured to comply with
international safety rule IEC 285.
To Next Page
Loading...
