EasyManua.ls Logo

Stanley TimerMax User Manual

Stanley TimerMax
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING INSTRUCTIONS
The first press of the
”Timer” button displays
the ON settings for the
1
st program, the second
press– its OFF settings.
The third press displays
the ON settings for the
2
nd program, and so on
to the twelfth press of the ”Timer” button, which
displays the OFF settings for the
6
th program.
You don’t need to use all six
ON/OFF
programs.
This number shows
which program of
six is being viewed.
Read instructions carefully in order to set-up your TimerMax properly.
1
PLUG THE TIMER INTO AN 125V OUTLET
that is visually and manually
accessible. Allow built-in batteries to initially charge for ten minutes,
fully charge in five hours. [Once fully charged the battery will
remember your settings for up to six months.] If the display appears as
shown here (flashing), proceed to step 2. If not, press and release small R/Reset” button
gently with a pencil point or opened paper clip.
2
To SET CURRENT DA
Y AND TIME, the /Time” button must be
pressed and held, throughout this step. Press the ”Day” button until
the present day of the week appears. Do the same with the ”h+”and
”m+” buttons to set the time. Note that either A or P appears in the
bottom right of display window to indicate AM or PM.
3
To SET THE TIMER
, press the ”Timer button once and the display
will appear as shown here. Next, set the time [with the ”h+” and
”m+” buttons, as above] and day(s) you want your appliance/light
ON
[refer to the Day button section on the bottom LEFT of this
page for a list of 11 different day(s) options]. Press the ”Timer but-
ton a second time [note that OFF appears in the display] and set the
time and day(s) you want your appliance/light
OFF
. For more detail,
see examples on other side. This step can be repeated five times,
for a total of
6
ON/OFF
programs.
4
Press the /Time” button to return to current day and time display.
5
Finally, plug your appliance/light into the timer. Be sure that the item plugged into the
timer is switched “ON”.
MO
12
:
00
OFF
MO TU WE TH FR SA SU
3
:
35
OFF
P
MO TU WE TH FR SA SU
TIMER
--
:
--
ON
This number
represents which
program of six is
being viewed.
1
140 58th Street, PO Box 67, Brooklyn, NY 11220
718-943-7000 •
Toll Free 800-730-3707
www.thencc.com
Day
Timer
R
h+
m+
Time Timer Day h+ m+
Reset Override
TimerMax
TimerMaxOutdoor
BUTTON FUNCTIONS
/Time
Set and display present day and time.
Timer
Set/view
6
ON/OFF
programs.
Day
– Set day(s). See eleven different settings
below [Hold for fast forward].
h+
– Set hours. [Hold for fast forward]
m+
– Set minutes. [Hold for fast forward]
/Override
– Manual
ON/OFF
. When this
button is pressed it will change the current state
from
OFF
to
ON
or vice versa. When the next
programmed time is reached the timer will revert
to the programs control.
R/Reset – Clear all settings.
Timer button
1. MO TU WE TH FR SA SU Daily
ON/OFF
settings will repeat every day.
2. MO will only operate Monday.
3. TU will only operate Tuesday.
4. WE will only operate Wednesday.
5. TH will only operate Thursday.
6. FR will only operate Friday.
7. SA will only operate Saturday.
8. SU will only operate Sunday.
9. MO TU WE TH FR Weekday
will operate Monday to Friday.
10. SA SU Weekend
will operate Saturday and Sunday.
11. MO TU WE TH FR SA 6 Day
will operate Monday to Saturday.
Liquid Crystal Display (
LCD
)
TimerMax
/TimerMaxOutdoor
MO TU WE TH FR SA SU
TIMER
--
:
--
ON
1
Day button settings for Timer mode
HINTS and TIPS
(
The rechargeable battery in the timer should be charged first by plugging it into a
regular household outlet (125V) for ten minutes.
(
Ensure the “ON/OFF” switch on your appliance or light is in the “ON” position when
connected to the timer.
(
Do not expose the timer to extremely high or low temperatures. Do not place in
direct sunlight.
(
TimerMax is for indoor use only. TimerMax Outdoor is weatherproof.
(
Display is clearer when viewed from above.
(
To fast forward, press and hold the “h+”, “m+” or “Day” button.
(
Check your programmed times by pressing the “Timer” button (up to 12 commands
available).
(
Ensure the hour has been set correctly to AM or PM, indicated either by A or P.
(
For any given day and time, if one program is set to ON, and another program OFF,
TimerMax will turn your appliance/light OFF.
(
Return to the clock function by pressing the /Time“ button.
is the trademark of The Stanley Works and Subsidiaries. Produced under license by The NCC, Brooklyn, New York.
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
Customer Service Assistance
Toll Free 800-730-3707
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week
Question and Answer IconNeed help?

Do you have a question about the Stanley TimerMax and is the answer not in the manual?

Stanley TimerMax Specifications

General IconGeneral
TypeDigital Timer
Number of Outlets1
Amperage15A
DisplayLCD
Power SourceAC
FeaturesCountdown

Summary

OPERATING INSTRUCTIONS

Plug Timer into Outlet

Plug timer into a 125V outlet and allow battery to charge for initial use.

Set Current Day and Time

Set the current day and time using the /Time, Day, h+, and m+ buttons.

Set Timer Programs

Program ON/OFF times and days for up to six schedules using Timer, Day, h+, and m+.

Final Appliance Connection

Connect appliance to timer and ensure appliance switch is in the ON position.

BUTTON FUNCTIONS

Key Button Operations

Details the primary functions of /Time, Timer, Day, h+, m+, /Override, and R/Reset buttons.

Timer Button Program Navigation

Explains how to cycle through the six ON/OFF program settings using the Timer button.

Day Selection Options

Lists the 11 available day settings for programming timer cycles.

HINTS and TIPS

Initial Charging and Usage

Recharge battery for 10 minutes; ensure appliance switch is ON.

Environmental and Display Guidelines

Avoid extreme temperatures, direct sunlight, and view display from above.

PROGRAMMING EXAMPLES

Example A: Daily ON/OFF Schedule

Step-by-step to set ON daily at 8:10 PM and OFF at 11:06 PM.

Example B: Weekend to Weekday Transition

Illustrates setting ON Saturday 1:30 PM and OFF Monday 7:15 AM.

Related product manuals