2
Getting Started
Before we start, let’s make sure we have the correct mount along with all
the required tools and hardware to complete the installation.
The TV must be a Flat Panel TV between 32”-70” and weighs no more than 85lbs.
The wall the TV will be mounted on is either concrete or drywall with wood studs.
You have all of the following tools:
If you answer “Yes” to all the questions above then you are ready
to begin the TV Mount installation!
!
Caution: Please read the entire manual before proceeding
View warranty and disclaimer on page 14
Drill Screwdriver Pencil Level Stud Finder Tape Measure Hammer Wrench Drillbit
Check out our free level app in the app store!
3/16 Hex Key
To Next Page
Loading...