Stanley TLR-EC3211T - Step 2 B: Install Wall Plate on Concrete; Position and Mark Wall Plate; Drill Pilot Holes; Concrete Installation Precautions

Level the wall plate and
make 4 marks with pencil to
show where to drill the pilot
holes.
Remove the wall plate and
drill the pilot holes with a 3/8”
drill bit.
Tools Required:
1
2
1 2
Pencil Level Drill
3/8” Drill Bit
Caution: The minimum depth of the concrete must be 8”.
Do not drill pilot holes into the mortar between the concrete.
!
7
Step 2B: Install Wall Plate on Concrete