Stanley TRE550 User Manual

HOW TO USE YOUR ELECTRIC STAPLER/NAILER
TO LOAD STAPLES
1. Unplug tool, (fig. 1)…(place on/off switch in "off" position, (fig. 2).)
2. Place on/off switch in "off' position.
3. Select proper staple length.
4. Use only staples identified by stock numbers on next page. Substitute staples may
cause jamming.
5. Hold tool upside down. (Squeeze latch and pull, (fig.3).)
6. Drop staples in channel, legs facing upward. Push latch back in to lock in place, (fig.
4).

Stanley TRE550 Specifications

General

Type	Electric Staple/Brad Nail Gun
Power Source	Electric
Staple Size	1/4 inch to 9/16 inch
Fastener Type	Staples and Brad Nails
Adjustable Power	Yes
Staple Gauge	18 gauge
Nail Gauge	18-gauge
Brad Nail Size	1/2", 5/8"