Stanton C.503 - Back up Memory

4. Pressing the TIME/ENTER button confirms the new parameter.
5. Pressing any other button exits the preset operation.
01 t PLAY Timer Play OFF*, ON
Turns the “Power on play” on and off
02 dIrECt Direct OFF*, ON
When direct mode is set to on, disc can be ejected when disc is played, and when insert the disc,
playback is started automatically.
03 rEAd TOC Read Mode nor*, AUt
Selects the TOC read mode.
nor: Uses the previous servo value.
AUt: Adjust the servo value every time.
04 rECALL Memory Auto Recall Mode nor*, AUt
Selects the track memory recall mode.
nor: Recall the track memory data when recall operation is done.
AUt: Recall the tempo setting, tempo range, KEY setting, Key lock setting, and BPM value from track
memory data when track is selected.
05 F PrE Factory Preset - SUrE –
Initialize the preset menu.
06 ALLCLr Memory All Clear - SUrE –
Clear the all memorized data.
* Indicates Factory Default Setting
3-10. Back Up Memory
Each time you turn off the power, the status of following features are stored into backup memory.
* Time mode
* Play mode
* Brake on/off
* Brake Time
* Key Lock on/off
* Auto Cue on/off
* Relay Play on/off
* Pitch Range
* Memory Bank
* Preset Settings
* Program
* Effect on/off* REVERSE on/off