4
Features
Top Panel
1. Platter: Place your record on the platter.
2. Tonearm: This is a ready-to-use pre-balanced tonearm and cartridge. The cartridge is
user-replaceable.
To play a record, gently move the tonearm over your record on the platter, and lower the
tonearm onto the record. Press the Start/Stop button to start or stop the platter spinning.
Important: Remove the plastic cover from the cartridge before using it.
3. Tonearm Rest: Use this rest to secure the tonearm when storing and transporting the
unit.
4. RPM Selector: Use this switch to select the speed of the platter: 33⅓, 45, or 78 RPM.
Please select the appropriate setting for the record you are playing; if the music comes out
at an unusual pitch, this may indicate that the wrong RPM setting is selected.
5. 45 RPM Adapter: Use this adapter when playing 45 RPM records.
6. Fader Selector Switch: Adjust this switch to select which of the 2 faders are active.
MIN MAX
23
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
To Next Page
Loading...
