Star Headlight & Lantern Split Phantom ULB24-DLP User Manual

PLIT450 REV. F 12/26/19
Star Split Phantom
Star Split Phantom
™
(Gen 4 Starburst LEDs)
Model ULB24-DLP
Undercover Interior LED Split Lightbar
With Takedown and Directional Pursuit Lights
Please Note: These instructions are provided as a general guideline only. Specific
mounting and/or wiring, may be necessary and are the sole responsibility of the
installer. Star Headlight & Lantern Co., Inc. assumes no responsibility for the
integrity of the installation for this or any of its products.

Star Headlight & Lantern Split Phantom ULB24-DLP Specifications

General

Brand	Star Headlight & Lantern
Model	Split Phantom ULB24-DLP
Category	Automobile Accessories
Language	English

Summary

Installation and Mounting Procedures

Gasket Installation

Slide the enclosed rubber channel over the front edge of the baffle before installing any brackets.

Mounting Responsibilities

Ensures secure mounting of the lightbar; installer/owner is responsible for its secure installation.

Baffle Adjustment

Wiring and Operation Basics

Wiring Requirements

Details power source, connections, and switches needed for proper installation and operation.

Indicator LED and Basic Controls

Explains the Indicator LED function and how main control is managed through harness wires.

Advanced Operation Modes

Pattern Select/Burst Mode Button

Details the functions of the Pattern Select/Burst Mode button for different operating modes.

Pattern List and Selection

Service and Warranty Information

LED Five Year Limited Warranty

Details the manufacturer's five-year limited warranty for factory defects in material and workmanship.