TROUBLE SHOOTING
If there is something wrong during operation, it may not be the unit’s problem. You may check against
the following list before send for repair.
1. The plug is not
securely inserted into the
socket or not connected
well.
2. The “ON/OFF” button
is not pressed.
1. Insert the plug pin into
the wall socket and
make sure it is
connected well.
2. Press “ON/OFF”
button after plugged.
1. Water tank not
enough water
2. Water pump is
obstructed.
1. Add water to ensure
there is enough water for
pumping
2. Clean water tank
discharge impurities.
NOTE:
THIS INSTRUCTIONAL CHART IS FOR REFERENCE PURPOSES ONLY, IF ANY TECHNICAL
ASSISTANCE IS NEEDED, PLAESE CALL STAR PROGETTI'S OFFICES FOR SERVICE/REPAIR AT
NO. 02/90639261 ext. 2
To Next Page
