5. Only use the unit with correct AC outlet.
6. Insert the plug pin into a wall socket.
A small beep sound can be heard and the power indicator will be on.
Note:
A. To protect against electric shock, do not remove plug from wall outlet by wet hand.
B. Unplug from outlet while moving the unit.
C. Insert the plug pin into the wall socket and make sure it is connected well.
7. Press “ON” button to make the unit ready for working Press “COOL” button to
improve the air damp, avoid skin dry and spall in winter. When press “COOL”, the
built-in UV lamp start working, the ultraviolet ray can sterilize the water flowing
through the UV lamp cover(shown as fig.4).
SAFETY WARNINGS
BEFORE ANY MANUAL WATER FILLING OPERATION, CLEANING AND
MAINTENANCE, TURN OFF THE DEVICE AND REMOVE THE PLUG FROM THE
ELECTRIC SOCKET.
To Next Page
Loading...
