STAR TRAC S SERIES PVS OWNER’S MANUAL
5
BEFORE YOU GETS TARTED
CHECK FACILITIES PREPAREDNESS
For a proper installation, please read this guide thoroughly and follow the
instructions. Star Trac’s goal is to help you have a successful and reliable installation,
for this reason we have come up with some helpful tips and check list to accomplish
this goal.
EQUIPMENT LAYOUT
Check to see that the equipment you will be adding the PVS to are place where they
will be used. It is recommended that you follow your installation guides for each one
of your Star Trac pieces of equipment in making sure that there is ample space
around them to insure a safe and enjoyable experience.
INPUT SIGNAL
In the world of entertainment today you have many choices. Star Trac recommends
you know what type of video signal (cable, analogue, digital, satellite, antenna) is in
the club facility and if it has a good signal. Don’t forget every installation is different.
Check to see that you have ample video coaxial cable connections to the locations
where the PVS will be installed.
CABLING
When Radio Frequency signals travel through cabling the signal will degrade over
distance. Connectors may degrade the signal as well. Check each output before
connecting to your PVS and make sure you have a clean strong signal to insure an
enjoyable experience. The Star Trac PVS requires a minimum signal strength of
45dBmV for analogue channels, and 40% for digital channels. Your club may
require signal amplifiers to achieve a good strong signal. Star Trac recommends you
use a qualified installer for your Audio Visual needs.
ELECTRICAL RECEPTACLES
The Personal Viewing Screen requires a plug-in 60 watt power supply to operate
(included). Check with your club facility to ensure ample electrical receptacles are
placed next to the equipment for a safe and proper install. Check with your con-
tractor to make sure you have enough power.
To Next Page
Loading...
