Star Trac Spinner Pro - Introduction

Page 3 SPINNER
®
OWNER’S GUIDE
INTRODUCTION _
This manual will acquaint you with the assembly, operation and maintenance of your Spinner
®
indoor cycling bike.
This manual provides information and instructions for the following Spinner
®
indoor cycling bike models:
• 7060 Series - Spinner
®
V manufactured by STAR TRAC®
• 7070 Series - Spinner
®
Pro manufactured by STAR TRAC®
• 7080 Series - Spinner
®
Elite manufactured by STAR TRAC®
• 7090 Series - Spinner
®
NXT manufactured by STAR TRAC®
Be sure to read and follow the information and instructions for your specific model before assembly, using or servicing your indoor cycling bike.
WARNING
Your Spinner
®
indoor cycling bike is designed for aerobic exercise. Please check with your physician before beginning any exercise program.
Do not push yourself to excess. Stop if you feel faint, dizzy or exhausted. Use common sense when exercising on the bike.
STAR TRAC® is a registered trademark of STAR TRAC® .
Spin
®
, Spinner
®
, Spinning
®
and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.
Smart Release™ is a registered trademark of Nautilus, Inc.
SPD is a registered trademark of Shimano American Corporation.