Star Wars JEDI User Manual

3 x 1.5V
ON / OFF
CHA
Gameplay
Important
Indoor use only.
Before use, please ensure an adult has installed the batteries, into the remote control, correctly using the
instructions shown in this instruction manual. Please retain this information for future reference.
JEDI™
TRAINING REMOTE
INSTRUCTION MANUAL
The Jedi Training Remote (JTR) has 2 modes:
• Mode 1 - RC. Squeeze the trigger of the handset to
control the Jedi Training Remote’s height and speed.
Press the button at the rear of the handset to activate
sting beams.
• Mode 2 - Force Control. Patented Proximity Sensors.
Press the FORCE CONTROL button on the handset
to activate Auto-Hover and Object detection system.
Sensors in the Jedi Training Remote will now detect
any solid objects below, including hands and feet,
and will fly up and away while firing simulated
sting beams!
Press the FORCE CONTROL Button again to stop.
Battery Installation
Uses: 3 x 1.5V AAA alkaline batteries
(not included)
“AAA”(LR03)
Use a small screwdriver (not included) to remove
the battery compartment cover. Install the batteries,
making sure the polarity (+ and -) is matched with
the symbols on the remote control handset. Replace
battery compartment lid and secure.
Sensor
FORCE
CONTROL
button
FIRE
button
Trigger
ON/OFF
USB
Charging
Switch
Charging - (Charge before use.)
The Jedi Training Remote charges via the USB cable.
The internal LED light will turn on to indicate charging
and will turn o when fully charged. Make sure the
Jedi Training Remote is o while charging.
Note: Charge time of 30 minutes will provide flying time
of approximately 5 minutes.
Sleep mode function
Hold the FIRE button on the remote controller for 3
seconds to enter sleep mode. The JTR will also enter
sleep mode if there is no action from the remote
controller or the JTR after 10 minutes.
Jedi Training Remote ON/OFF function
Press the ON/OFF button.
2 orange lights will flash and the JTR is now on standby
ready for flying.
Remote Controller ON/OFF function
Install 3x AAA battery
Press the FIRE button, a red light will flash slowly.
Pull the trigger back and release. The red light will now
stay lit, signifying the handset is now paired and ready
to fly the Jedi Training remote.
To turn o the JTR
Press the ON/OFF button again to switch o.
To turn o the controller
Press the FIRE button for 3 seconds.
FOLD ALONG DOTTED LINE
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
1
.
5
V
L
R
0
3
/
A
A
A
Control Jedi Training
Remote remotely!
MODE 1
Patented proximity
sensors.
Use hands or feet!
MODE 2
Please Note: If the JTR Heliball crashes it automatically turns itself o. To resume flying turn the Heliball back on.

Star Wars JEDI Specifications

General

Brand	Star Wars
Model	JEDI
Category	Toy
Language	English

Summary

Jedi Training Remote Gameplay

Mode 1 - RC Control

Control height and speed with trigger; activate sting beams with rear button.

Mode 2 - Force Control

Utilize proximity sensors for auto-hover and object avoidance while firing simulated beams.

Important Notes and Setup

Indoor Use Specification

This product is intended for indoor use only.

Battery Installation

Details on installing 3 x 1.5V AAA batteries, ensuring correct polarity and compartment security.

Charging Instructions

Charge the device via USB cable before use; LED indicates charging status.

Power and Pairing Functions

Jedi Training Remote ON/OFF

Turn the JTR on by pressing the ON/OFF button; indicated by flashing orange lights.

Remote Controller ON/OFF & Pairing

Pair controller by pressing FIRE button; turn controller off by holding FIRE for 3 seconds.

Sleep Mode Activation

Enter sleep mode by holding FIRE button for 3 seconds or after 10 minutes of inactivity.

Troubleshooting and Disposal

Common Operational Issues

Addresses propeller not moving, sudden stops, loss of control, and steering issues.

Li-poly Battery Disposal

Step-by-step instructions for safely removing and preparing the Li-poly battery for disposal.

General Battery Safety

Guidelines on correct battery installation, polarity, mixing, and removal from devices.

Safety and Compliance Warnings

Includes CE marking, age restrictions, choking hazards, and propeller safety precautions.