Need help?Do you have a question about the Star STAR-MAX Series and is the answer not in the manual?
Symbols intended to alert users to important operating and maintenance instructions.
Instruction to retain the manual for future reference and manufacturer's liability.
Manufacturer reserves the right to change specifications without notice.
Contact local authorized service agent for maintenance and repairs.
Reference the listing provided with the unit or website for updated service agents.
Provides business hours, telephone, fax, and email for service inquiries.
Equipment is for commercial use; read all instructions and labels before operation.
Check shipping containers for freight damage and make claims with the carrier.
Installation must conform to National and Local Electric Codes; use qualified electrician.
Explicit warning against connecting the griddle to direct current (DC).
Detach junction box cover and use pigtail leads for supply connection.
Install unit with minimum clearance and adjust feet for proper leveling and slant.
Griddles require an exhaust hood and adequate air supply; maintain specific distances.
Steps to season the griddle surface to prevent food sticking using cooking oil.
Controls are ON/OFF switches and thermostats; one thermostat per 12" section.
Set thermostat for cooking; lower temperature to 250°F during idle periods.
Each thermostat has a signal light indicating when the unit is not in the off position.
Daily and post-use cleaning to prevent grease buildup and carbonization.
Clean stainless steel body with a non-abrasive cleaner and soft cloth.
Remove and wash the waste drawer daily like any ordinary cooking utensil.
Cleaning instructions for chromium surfaces to prevent grease buildup and carbonization.
Warnings against using abrasives, sharp instruments, steel wool, or liquid grill cleaner.
Contact factory, service representative, or local company for service or maintenance.
Exclusions for the Chrome-Max griddle surface warranty due to misuse or improper installation.
Warranty is void if the unit is improperly installed, used with incorrect voltage, or misused.
Details the 1-year warranty for new products, covering defects in material/workmanship.
Lists examples of portable equipment covered under warranty terms.
Lists items and conditions not covered by the warranty, such as misuse or improper maintenance.
Warranty excluded for misuse, improper maintenance, installation errors, and wear items.
How to contact the service department for assistance with operation or maintenance.
Provides business hours, phone, fax, email, and website for service inquiries.
Wiring diagram for the 15-inch electric griddle, including component connections.
Notes on supply connections using copper wire and internal wiring gauge.
Wiring diagram for the 24-inch electric griddle, detailing connections for 1-phase and 3-phase.
Wiring diagram for the 36-inch electric griddle, showing connections for single and three-phase.
Notes on supply connections using copper wire and internal wiring gauge.
Wiring diagram for the 48-inch electric griddle, detailing power supply connections.
Wiring diagram for 3-phase, 5-wire systems for 220/380V and 230/400V models.
Warning against connecting to electrical systems exceeding 240 volts to ground.
Wiring diagram specific to the 536TGF-PE model, detailing connections.
Details of various griddle plate assemblies for different models.
Part numbers for heating elements and associated clamps.
Part numbers for box covers and connection box components.
Part numbers for rear and bottom panels across models.
Part numbers for various front panels, guards, and covers.
Part numbers for thermostats, pilot lights, and knobs.
Part numbers for center walls, grease drawers, wire sets, and cord sets.
To Next Page
General