96
Installing Propane Cylinder(s)
1. Connect the 3/8” low pressure hose to the outlet of
the two stage regulator.
2. Attach the regulator with the “Z” bracket on the cen-
ter of the front wall with the vent pointing down.
3. Attach the protective plastic cover to the regulator.
4. The regulator has a 90° elbow that directs the inlet
toward the trailer curbside.
5. Place the cylinder on the bracket provided on the
A-frame and position it so the outlet of the cylin-
der valve is pointed directly outward to the curbside
wall.
Make sure all fasteners are secured before traveling.
Use care when fueling your motor fuel tanks and/or
propane containers. Make certain your propane tank is
properly fastened in place.
This label should be kept permanently axed to your
recreation vehicle.
Some states prohibit propane appliances to be oper-
ated during travel, especially in underground tunnels. Know
the laws for the areas where you travel.
To Next Page
Loading...
