6
DELAY FUNCTION
This coee machine can delay brewing by up to 24 hours. To delay brewing, follow steps A to F
of the “HOW TO MAKE COFFEE” section. Then, follow the below steps to activate the automatic
delayed start function:
A. To set the current clock time, press HOUR and MINUTE buttons. NOTE: The time cycle is 24
hours.
B. Press the PROGRAM button, the indicator will light up in green and flash. This means the
coee maker has entered the presetting time state. Set the desired brewing time by pressing
the HOUR and MINUTE buttons repeatedly.
C. Press the DELAY BREW button, the indicator will light up in green. The LCD screen will
display the current clock time. NOTE: You may cancel the automatic start function by pressing
. If you want to change the automatic start time, follow steps B-C once more.
D. When the delayed time is reached, the indicator will light up in red and the appliance will
start brewing.
E. If you do not want to serve immediately after brewing is complete, keep the coee maker
ON and the coee will be kept warm in the warming plate. The appliance will shut o
automatically 120 minutes after the has been activated if the unit has not been manually
disconnected at the completion of brewing. For a better coee taste, serve it just after
brewing. NOTE: During the brewing process, the “PROGRAM”, “DELAY BREW”, “HOUR” and
“MINUTE” buttons are invalid.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do
not immerse cord, plug or unit in water or any other liquid. After each use, always make sure plug is
first removed from wall outlet.
1. Clean all detachable parts after each use in hot sudsy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the above area of the funnel and drip onto the product base
during brewing. To control the dripping, wipe o the area with a clean, dry cloth after each
use.
4. Use a damp cloth to gently wipe the warming plate. Never use an abrasive cleaner.
5. Assemble all parts and put aside for next use.
CLEANING WITH VINEGAR
Mineral deposits left by hard water can clog your coee maker. Cleaning is recommended once a
month.
A. Pour white vinegar into the water reservoir up to the 6-cup line on the water window.
Add cold water up to the 10-cup line.
B. Put a filter paper in the filter basket and close the cover. Set the empty carafe on the warming
plate.
To Next Page
Loading...
