9
4. Start weighing
• Place the scale on hard and flat floor.
• Stand gently on the scale. Place your bare feet on the electrodes of the scale
to get complete body analysis composition.
• The weight reading is stable and flashes, then begins to be transmitted
to your smart device.
• App will show and save all index and history record.
• The scale shuts off after several seconds.
Please note:
If it is impossible for you to obtain weighing results from your scale to your
smart device:
• Verify if the Bluetooth function is activated on your device.
• Verify if the Bluetooth scale is within the valid signal coverage (5 -10 meters).
• Verify if the batteries still have power. Otherwise, please change them.
• You can also restart your device and set up the Bluetooth connection again.
Fail to connect to your device
• Please make sure only one device is setting up connection with the
Bluetooth scale.
• Please make sure your device is equipped with Bluetooth 4.0 or above.
LCD has no response
• Please check the batteries and replace them if necessary.
Place the
scale on hard
and flat floor.
Check the
measurement
data on App.
Keep your
bare feet on
the electrodes
of scale.
To Next Page
Loading...
