StarHub TV+ User Manual

Get your StarHub TV+ box
ready for Chromecast with
these simple steps.
Set up your StarHub TV+ box by
1
Connecting to the internet
via WiFi or by connecting the
Ethernet cable to your
broadband router.
Connecting to your TV using
the HDMI cable.
Plugging in the power adaptor.
Follow the on-screen instructions
until you reach the login screen.
2
Select the Settings icon on the bottom
right corner of the login screen.
3
4
If you had signed in to your Google
account during the on-screen
instructions, go to Set your
device name under Suggestions
to set a name.
This device name will be used to
identify your StarHub TV+ box on
your mobile device for Chromecast.
If you have skipped the
Google account sign-in, go to
Device Preferences > About >
Device name to set the device name.

StarHub TV+ Specifications

General

Operating System	Android TV
Service Provider	StarHub
Parental Controls	Yes
Resolution	Up to 4K UHD
Connectivity	Wi-Fi
Ports	HDMI, USB
Type	Set-top box
Supported Services	Streaming Apps
Remote Control	Yes, with voice search
Voice Search	Yes

Summary

StarHub TV+ Box Chromecast Setup

Initial Hardware and Network Connection

Connect the TV+ box to power, TV via HDMI, and internet.

Follow On-Screen Setup Instructions

Navigate the on-screen prompts until the login screen is reached.

Accessing Device Settings

Select the Settings icon from the bottom right of the login screen.

Configuring Device Name for Chromecast

Set the device name via Suggestions or Device Preferences for identification.

Casting Programmes to TV

Mobile App Login and Wi-Fi Connection

Log in to the StarHub TV+ app with Hub iD; ensure devices share the same Wi-Fi.

Select Programme and Initiate Cast

Choose a programme in the app and tap the Chromecast icon.

Select Target Device

Choose your StarHub TV+ box from the list of available devices.

Control and Enjoy Casted Content

Manage playback via the mobile app and view content on your TV screen.