Starline E9 - Page 25

short user manual
25
If the door is opened or ignition is switched on after fulllment
of the «program neutral», remote and automatic engine
starting will be canceled until the next execution of the
«program neutral» algorithm.
Preparation of a car with automatic transmission for remote and
automatic engine starting
Make sure the automatic transmission selector is in the «Parking»
position.
Engine starting
Remote engine starting is performed by long pressing on remote
key button 1
1
Automatic engine starting can be performed according to one of
the conditions:
• according to temperature value. Engine starting at engine
temperature decrease below the specied value.
The temperature value is set in the cursor menu on the remote
key;
• according to value of storage battery voltage. Engine starting at
storage battery voltage decrease.
The voltage value is set in the cursor menu on the remote key;
• periodic. Engine starting with the preset operation period after the
preset recurrent time interval.
The interval and period are set in the cursor menu on the remote
key;
• by alarm clock. Engine starting at the preset time.
Engine starting schedules are set in the cursor menu on the
remote key.