Need help?Do you have a question about the Starline E9v2 and is the answer not in the manual?
General| Brand | Starline |
|---|---|
| Model | E9v2 |
| Category | Security System |
| Language | English |
Explains LED service button and embedded buzzer sound indications for system status.
Covers tag connection checks, system control, and battery replacement procedures.
Explains the icons and meaning of the display on the 2-way remote key.
Details button push durations and command combinations for system control.
Guides through the main settings menu and time zone configuration.
Configures light/siren indications and volume for arming, disarming, and alarm modes.
Adjusts motion, tilt, shock sensor sensitivity and tag loss/detection ranges.
Sets remote key connection control and detection range.
Configures turbotimer run time and engine start durations.
Configures parking heater start duration, activation, and temperature.
Sets engine start temperature and sound profile configurations.
Adjusts volume levels for alarm sounds and button presses.
Manages sound profile resets and sound tone configurations.
Covers Armed, Disarmed, Silent, and Emergency Arming modes.
Details Automatic Doors, Trunk, Keyless-Go, Alarm, Panic, Anti-hijack, Slave, Hands Free, Service, Immobilizer modes.
Guides on preparing manual transmission vehicles for remote engine start.
Explains engine start, stop procedures, and ignition takeover.
Covers parking heater control and the intelligent turbotimer function.
Details Beach mode, Risky Parking, and Dashcam control.
Outlines general registration entry and procedures for various accessories.
Covers recording, changing, and deleting the PIN-to-Drive authorization code.
Explains emergency disarming with the service button and changing the disarm code.
Illustrates the physical layout of the security system components.
To Next Page
