user manual
41
after every disarming or every ignition switching O and at next ignition
switching On.
PIN code can be entered with factory buttons only when ignition is
switched On.
If authorization is not passed within 1 min, then engine will be stopped at
a drive attempt for 1 min or until successful authorization passed.
Remote engine start
The feature allows to make remote and automatic engine start and stop
to warm up or cool down vehicle interior to a comfortable temperature
and warm up engine before a trip.
Preparation of a vehicle with manual transmission for remote and
automatic engine start.
If vehicle is equipped with manual transmission, then system must be
set to “Program neutral” state to prepare for further safe remote or
automatic engine start in following procedure:
• tighten parking brake at engine running
• remove key from ignition barrel, engine continues running, service
button LED will light up permanently
• leave vehicle, shut doors, hood, trunk and arm security system.
Engine will be stopped.
• system turns to Armed
• “N” (program neutral) icon is indicated on remote key display and
StarLine app main screen
• system and vehicle are now ready for remote and automatic engine
start.
If any door is open or ignition is switched On after setting to
Program neutral, then remote and automatic engine start will
be prohibited until Program neutral procedure is executed
again.
To Next Page
Loading...
