EasyManua.ls Logo

Starline E9v2 - Immobilizer Mode

Starline E9v2
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
StarLine E9 v2
40
entry to system conguration settings
entry to registration mode
Service mode is enabled by any of following ways:
tag button long push level 1 (if this option is enabled in system
conguration)
short push of remote key buttons
in remote key operation modes menu
Service mode activation is conrmed with a tag LED light turned yellow.
Service mode is disabled in one of following ways:
tag button long push level 1 (if this option is enabled in system
conguration)
short push of remote key buttons
in remote key operation modes menu
emergency disarm code entry
Automatic exit from service mode
If this option is enabled in system conguration then system automatically
turns from Service mode to Waiting for authorization at congured event
and ignition On. If authorization successfully passed then system turns to
Disarmed. If authorization failed then system triggers Alarm and activates
engine blocking.
This option requires owner authorization, embedded sensors
and vehicle speed from CAN bus to be enabled in system
conguration.
Immobilizer mode
Immobilizer mode prohibits unauthorized drive attempt.
Depending on settings system waits for owner authorization with a tag
or remote in detection range or PIN code entered with factory buttons

Related product manuals