Starline E9v2 - Intelligent Turbotimer

StarLine E9 v2
44
Factory and optional parking heater may have embedded
primary factory settings, dier from those congured in system
settings.
Parking heater run time can be extended with sending repeated
activation command.
Parking heater can be stopped manually by sequential pushing remote
key buttons
2
2
;
Parking heater can be automatically started before remote and
automatic engine start on events and terms set in system conguration.
Parking heater can be started automatically in following terms:
• by engine temperature – parking heater is started when engine
temperature is below the set value
• by timer – parking heater is started at a set time
Temperature and time for parking heater activation can be set in:
• remote key operation mode menu
• StarLine mobile app
Parking heater is stopped when the set engine start temperature (for
automatic engine start) or the set parking heater run time is reached and
engine will be started then.
Default parking heater automatic run time is 20 min. It can be extended
by sending heater start command again.
Intelligent turbotimer
Turbotimer option is used to temporary continue engine running after a
trip to cool down turbo charger and extend its lifetime.
The option must be initially enabled and programmed while
installation.
Turbotimer activation on vehicles with ignition barrel: