Starline E9v2 - Engine Start, Stop, and Takeover

StarLine E9 v2
42
Vehicle equipped with automatic transmission must be switched to
Parking position in order to prepare it for remote or automatic engine
start.
Engine start
Remote engine start can be activated by one of following ways:
• tag button short push once (if enabled in system conguration)
• long push level 1 of remote key button
1
• 3 x Lock command from factory remote control (if supported for
particular vehicle model and enabled in system conguration)
Automatic engine start can be activated by following terms:
• engine or interior temperature
• main vehicle battery voltage drop
• periodic engine start set in hours
• engine start by timer
Parameters for automatic engine start can be congured in:
• remote key operation modes menu
• StarLine mobile app
Automatic engine start is allowed only in armed mode, in 5
min after last engine stop and 1 hour after previous remote
and automatic engine start.
Engine stop
Engine will be stopped when:
• tag button short push once (if enabled in system conguration)
• long push level 1 of remote key button
2
;
• SMS text command 20
• alarm mode triggered
• vehicle motion detected
• hood open