Starline E9v2 - Sound Profile Management; Sound Profile and Tone Settings

user manual
31
2 — selected volume
3 — selected sound prole
4 — vibration: — enabled, — disabled
Sounds volume is tuned with
2
and
3
buttons short push.
Vibration is enabled and disabled with
4
button short push.
Next sound signal type is ipped with
1
button short push.
Sound prole settings menu is automatically exited in 10 sec if no any
buttons pushed.
After exit the set sound prole is indicated for several sec.
Resetting sound profile to factory default settings
1. Select the necessary sound prole with corresponding buttons
combination.
2. Enter sounds prole menu with
3
long pushing level 2
3. Hold 3 button until next sound signal
3
.
Setting sounds tone
The sounds tone can be also setup in sounds prole menu.
1. Enter to sounds prole menu with
3
long pushing level 2
2. Push buttons
2 3
shortly. The current sounds tone St-1 or St-2 shall be
displayed. St-1 tone is set as default.