Starline E9v2 - System Settings: Indications and Volume; Indication and Volume Configuration

StarLine E9 v2
24
Current time is automatically retrieved from cellular network
and satellites data (if GPS module is available).
Setting lights and siren indication at Arming and
Disarming
Select 2 item of Settings menu and set the mode with
2
and
3
buttons:
0 – hidden mode without siren and lights indication
1 – silent mode with lights indication only
2 – full mode with siren and lights indication
3 – only siren indication
Setting siren volume at Arming and Disarming
Select 3 item of Settings menu and set siren volume level with
2
and
3
buttons:
0 – silent mode, 10 – max volume
Setting lights and siren indication in Alarm mode
Select 4 item of Settings menu and set the mode with
2
and
3
buttons:
0 – hidden mode without lights and siren indication
1 – silent mode with lights indication only
2 – full mode with lights and siren indication
Setting siren volume setup in Alarm mode
Select 5 item of Settings menu and set siren volume level with
2
and
3
buttons:
0 – silent mode, 10 – max volume