EasyManua.ls Logo

STARLINK Remote Control 2.0 - Technical Specifications and Warnings

STARLINK Remote Control 2.0
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
|
Additional guidance
WARNING: If Portable Radio Frequency communications
equipment is used closer than 30 cm (12 inches) from your
Remote Control 2.0, degradation of the performance of your
hearing aid could result. If this occurs, move away from the
communications equipment.
The Remote Control 2.0 has a rating of IP 52 per IEC 60529.
This means that the Remote Control 2.0 is protected from dust.
Do not connect the Remote Control 2.0 to any external device.
The expected service life of the Remote Control 2.0 is 3 years.
Wireless Technical Description
Starkey Laboratories, Inc. Remote Control 2.0 operates in
the 2.4 - 2.4835 GHz band with a maximum effected radiated
power of 3 dBm with transmission modulation type of
1M06F1W. The receiver section of the radio has a bandwidth
of 2 MHz.
The Remote Control 2.0 has been tested to, and has passed,
the following emissions and immunity tests:
IEC 60601-1-2 radiated and conducted emissions
requirementsfor a Group 1 Class B device as stated in
CISPR 11.
RF radiated immunity at a field level of 10 V/m between
80 MHz and 2.7 GHz as well as higher field levels from
communications devices as stated in Table 9 of IEC
60601-1-2.
Immunity to power frequency magnetic fields at a field
level of 30 A/m and to proximity magnetic fields as stated
in Table 11 of IEC 60601-1-2.
Immunity to ESD levels of +/- 8 kV conducted
dischargeand +/- 15 kV air discharge.
EU ADVERSE EVENT REPORTING
Any serious incident that has occurred in relation to your
device should be reported to your local Starkey representative
and the Competent Authority of the Member State in which