Instruction Manual
3
For Windows® Vista/Vista-x64
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, select Locate and install driver software (recommended).
3. Click Next to continue to setup.
4. The Add New Hardware Wizard will now ask you Would you like to install this device software?.
Click Install to continue.
5. Click Close once driver installation is complete.
To Verify Windows® Driver Installation
To verify that the necessary software has been installed, Click on the Device Manager tab in
System Properties, which you can be accessed through the Control Panel or by following these
steps:
1. Right-click on My Computer and select Manage.
2. In the left pane of the Computer Management window, click on Device Manager.
You should see one PCI Express ECP Parallel Port … installed under Ports (COM & LPT) item.
To Next Page
Loading...
Need help?
General
