StarTech.com PEXUSB3S2E2I User Manual

Manual Revision: 02/17/2012
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
PEXUSB3S2E2I
4 Port USB 3.0 PCI Express Card - 2 External,
2 Internal Header w/ SATA Power
*actual product may vary from photos

StarTech.com PEXUSB3S2E2I Specifications

General

Host Interface	PCI Express 2.0 (x1 slot connector)
External Connectors	2 x USB 3.0 type A female
Internal Connectors	2 x 10-pin IDC header male 1 x 15-pin SATA Power
Chipset ID	VLI VL800
Supported Standards	USB 3.0
Maximum Data Transfer Rate	USB 3.0: 5 Gbps
LBA Support	48-bit
Operating Temperature	0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature	0°C ~ 80°C (32°F ~ 176°F)
Humidity	10% ~ 90% RH
Compatible Operating Systems	Windows XP/ Server 2003/ Vista/ Server 2008 R2/ 7 (32/64-bit)

Weight and Dimensions

Form Factor	Full/ Low Profile
Dimensions	83.0mm x 120.0mm x 20.0mm
Weight	45g

Summary

Introduction

Packaging Contents

Lists all items included in the product package for setup and use.

System Requirements

Details the necessary hardware and software prerequisites for installing the PCI Express card.

Installation

Hardware Installation

Step-by-step guide for physically installing the PCI Express card into the computer system.

Driver Installation

Instructions for installing the necessary software drivers for the USB 3.0 controller card.

Specifications

Technical Support and Warranty Information

Limitation of Liability

Legal disclaimer regarding the extent of StarTech.com's responsibility for product damages.