StarTech.com SV431DPUA2 Quick Start Guide

Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 02/15/2018
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/SV431DPUA2
Package contents
• 1 x KVM switch
• 4 x foot pads
• 1 x universal power adapter (NA/JP, EU, UK, ANZ)
• 1 x quick-start guide
Requirements
• DisplayPort cables
• USB-A to USB-B or USB-C to USB-B cables
• 3.5 mm audio cables
• Computer system or video card enabled with DisplayPort
• Computer system enabled with USB
• Display device (for example, monitor, projector, TV, and so on)
enabled with DisplayPort
• Standard wired or wireless USB keyboard
• Standard wired or wireless USB mouse
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/SV431DPUA2.
SV431DPUA2
4-Port USB KVM Switch - DisplayPort - 4K 60Hz
*actual product may vary from photos
Product diagram
Front view
Port selection/link LEDs
Power LED
Port selection buttons
Back view
Power
adapter
port
USB HID
ports
USB hub
ports
PC
DisplayPort
port
PC
USB
port
PC
audio
ports
Installation
Set up your PC
The following setup changes are required for PC users and aren’t
necessary if you’re using a Mac computer.
1. In Standard CMOS, set Halt on Error to All But Keyboard.
2. In PNP and PCI Setup, set PNP OS Installed to Ye s.
3. In PNP and PCI Setup, set USB IRQ to Enabled.
Connect the console to the KVM switch
1. Turn o your computer and any devices or peripherals that are
connected to it (for example, printers, external hard drives, and so
on).
2. Connect a monitor or display to the console DisplayPort port.
3. Do one of the following:
• Connect a keyboard and a mouse to the USB keyboard and
mouse ports.
• If you’re using a combination wireless keyboard and mouse,
connect the wireless receiver to the keyboard port.
4. If necessary, do any of the following:
• Connect speakers to the console audio speaker port.
• Connect a microphone to the console mic port.
• Connect USB peripherals to the USB hub ports.
Console
audio
ports
Console
DisplayPort
Port

StarTech.com SV431DPUA2 Specifications

General

Brand	StarTech.com
Model	SV431DPUA2
Category	Switch
Language	English