Instruction Manual
13
7.10 Working Mode
There are 5 duplication speeds:
• Slowest Mode
• Slower Mode
• Normal Mode (default setting)
• Faster Mode
• Fastest Mode
Change the duplication speed. Normal speed is recommended for most Flash drive
types. If there is a high failure rate when duplicating, try lowering the speed.
7.11 Set HDD Mode
Choose ‘Active Mode’ to duplicate to USB Hard Disk Drives (HDD/SSD). Choose ‘Inactive
Mode’ to duplicate USB Flash drives. Inactive mode is set by default.
7.12 Restore Default
Restore the system back to factory defaults.
To Next Page
Loading...
