Statesman CHM90SS - User Manual

Questions and Answers

K
Kayla LawrenceAug 8, 2025
Why is my STATESMAN Ventilation Hood vibrating?
- C
  Cory BatesAug 9, 2025
  Your STATESMAN Ventilation Hood might be vibrating due to several reasons: a damaged blade (replace the blade), a motor that is not tightly fastened (fasten the motor tightly), or the cooker hood itself is not tightly fixed (fix the cooker hood tightly).
S
Sharon DoughertyAug 13, 2025
What to do if my STATESMAN Ventilation Hood has insufficient suction?
- R
  Rebecca AnthonyAug 13, 2025
  If your STATESMAN Ventilation Hood isn't providing enough suction, it could be due to the distance between the cooker and the hood being too large (readjust the distance). Alternatively, too much ventilation from open doors or windows might be the cause (choose a new place to install the appliance or close some doors/windows).
C
Charles HernandezAug 19, 2025
What to do if my STATESMAN Ventilation Hood is leaking oil?
- M
  Megan IbarraAug 19, 2025
  If you notice oil leaking from your STATESMAN Ventilation Hood, it may be due to the outlet and air ventilation entrance not being tightly sealed (take down the outlet and seal with glue). Another possible cause is leakage from the connection of the U-shaped section and cover (take U-shaped section down and seal).
M
Michael ColemanAug 25, 2025
How to fix a STATESMAN Ventilation Hood that is inclining?
- V
  vazquezcarolynAug 25, 2025
  If your STATESMAN Ventilation Hood is inclining, it's likely that the fixing screws or the hanging screws are not tight enough. You should tighten the fixing screws or tighten the hanging screws to make it horizontal.
D
Dustin JonesAug 29, 2025
What to do if light is on but motor doesn't work on my STATESMAN Ventilation Hood?
- C
  chelsearossAug 29, 2025
  If the light is on but the motor isn't working on your STATESMAN Ventilation Hood, the blades might be blocked. Other potential issues include a damaged capacitor (replace capacitor), a damaged motor (replace motor), or the internal wiring of motor is cut off/disconnected (replace motor). An unpleasant smell may be produced in the last case.
C
Cheyenne RodriguezSep 3, 2025
What to do if both light and motor do not work on my STATESMAN Ventilation Hood?
- T
  tjenningsSep 3, 2025
  If both the light and motor aren't working on your STATESMAN Ventilation Hood, the light might be damaged (replace lights) or the power cord could be loose (connect the wires as per the electrical diagram).