Solutions Strategies and Innovations
Static Solutions Inc. - Ohm - Stat RT - 1000 Information
ANSI/ESD-S20.20-1999
ESD DS 11.12 ESD Association Standard for the
Protection of Electrostatic Discharge Susceptible
Items - Volume Resistance Measurement of Static
Dissipative Planar Materials
1
ESD ADV 11.2 ESD Association Advisory for the
Protection of Electrostatic Discharge Susceptible
Items - Triboelectric Charge Accumulation Testing
1
ANSI/ESD S 11.31 ESD Association Standard for
Evaluating the Performance of Electrostatic
Discharge Shielding Materials - Bags
1
ESD STM 12.1 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items - Seating - Resistive
Characterization
1
ESD DS 13.1 ESD Association Standard for
Measuring Electrical Potential from Soldering/
Desoldering Hand Tools
1
ESD ADV 53.1 ESD Association Advisory for the
Protection of Electrostatic Discharge Susceptible
Items - ESD Protective Workstations
1
ESD STM 97.1 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items - Floor Materials and Footwear -
Resistance Measurement in combination with a
Person
1
ESD STM 97.2 ESD Association Standard Test
Method for the Protection of Electrostatic Discharge
Susceptible Items - Floor Materials and Footwear -
Voltage Measurement on a Person
1
ANSI C63.16 "American National Standard Guide for
Electrostatic Discharge Test Methodologies and
Criteria for Electronic Equipment"
IEC 1000-4-2, "Electromagnetic Compatibility for
Industrial Process Measurement and Control
Equipment, Part 2; Electrostatic Discharge
Requirements"
IEEE STD C62.38, "IEEE Guide on ESD: ESD
Withstand Capability Evaluation Methods (for
Electronic Equipment Subassemblies)"
MIL-STD-750 Method 1020, Military Standard, Test
Methods for Semiconductors Devices, Electrostatic
Discharge Sensitivity (ESDS) Classification
2
2
Defense Printing Service Detachment Office, Bldg
4D (NPM-DODSSP), 700 Robbins Ave.,
Philadelphia, PA 19111-5094, 215-697-5164
MIL-STD-883 Method 3015, Department of Defense,
Test Method Standard, Microcircuits, Electrostatic
Discharge Sensitivity Classification
2
MIL-STD-2073-1 Department of Defense, Standard
Practice for Military Packaging
2
MIL-PRF-19500 Performance Specification, General
Specification for Semiconductor Devices
2
QML-19500 Qualified Manufacturers List of Products
Qualified Under Military Specification MIL-PRF-
19500, General Specification for Semiconductor
Device
2
MIL-PRF-38535 Performance Specification, General
Specification for Integrated Circuits (Microcircuits)
Manufacturing
2
QML-38535 Qualified Manufacturers list of
Advanced Microcircuits Qualified Under Military
Specification MIL-PRF-38535, General
Requirements for Microcircuits Manufacturing
2
VZAP, Electrostatic Discharge Susceptibility Data
3
4. DEFINITIONS
The terms used in the body of this document are in
accordance with the definitions found in EOS/ESD
Association Glossary of Terms, EOS/ESD ADV 1.0.
5. PERSONNEL SAFETY
The Procedures and equipment described in this
document may expose personnel to hazardous
electrical conditions. Users of this document are
responsible for selecting equipment that complies
with applicable laws, regulatory codes and both
external and internal policy. Users are cautioned
that this document cannot replace or supersede any
requirements for personnel safety.
Ground fault circuit interrupters (GFCI) and other
safety protection should be considered wherever
personnel might come into contact with electrical
sources.
Electrical hazard reduction practices should be
exercised and proper grounding instructions for
equipment must be followed.
6. ESD CONTROL PROGRAM
6.0.1. ESD Control Program Requirements
The Program shall include both Administrative and
Technical Requirements as described herein. The
3
IIT Research Institute, 201 Mill, Rome, NY 13440,
315-336-2359
To Next Page
Loading...