4.1.2.1 MOVING AROUND THE MENU
We can browse through the other items in the Root menu by pressing
Subsequent presses of Cycle moves the menu position from right to left on the
previous diagram of the root menu. Notice that after reaching CALIB, the menu
position wraps around to the start. This principle of menu operation is applied
throughout the system.
4.1.2.2 GETTING INTO A SUBMENU
Up to now we have simply moved within the Root menu, in order to get into a
submenu, we must first cycle around the Root menu until the required submenu is
displayed.
For the purposes of this tutorial press the
CYCLE key until InPut is displayed.
In order to get into the INPUT menu
simply press the SHIFT key.
TUTORIAL
Page 29
To Next Page
Loading...
Need help?
General