10 PEr ( Jump out band, 10% of engineering range )
Note that 1% of engineering range for thermocouples is 20 degrees and for RTDs is
10 degrees.
default setting: 1 PEr
4.2.2.12 Cond ( Input conditioning for Current
and Voltage ranges)
This feature is available for Voltage and Current inputs only, and enables the user to
specify one of the following input characteristics. This characteristic is then applied to
the Raw input.
The five options are:
LinEAr ( Linear relationship, no conditioning )
USEr ( User defined characteristic. See 4.2.2.13 )
S root ( Square root Law. See 4.2.2.14 )
root 32 ( Power 3/2. See 4.2.2.15 )
INPUT MENU
Page 44
To Next Page
Loading...