6
The truck should be regularly checked and maintained to prevent fatigue, wear
and damage of parts, and to detect possible hidden dangers before a serious
damage occurs.
Battery is the energy source of the truck. It can provide sufficient power
according to the corresponding instructions. The long-lasting battery endurance can
keep the machine in a good working condition.
6.1.1 Daily inspection
① Check if battery is full (check battery indicator)
② Lift the forks to highest to check if hydraulic oil is adequate. Add YA-N32
hydraulic oil or similar oil if needed.
6.1 .2 Weekly inspection
Truck users should spend a few minutes per week cleaning the machine, with
special attention to remove winding materials such as silk, linen, and rags on wheels
and axles.
6.2 Hydraulic oil replacement
Users are advised to replace hydraulic oil after 1 month use (or working hours up
to 200hrs). Even if the operating hours has not been reached, hydraulic oil should be
replaced once a year. Use YA-N32 hydraulic oil or similar oil, which must be filtered
clean and with sufficient amount. Fully lift the forks 2-3 times to ensure no excess air
inside the hydraulic system, and then truck can be put into normal use. If forks fail to
rise to the required height, more hydraulic oil is need to be filled.
7. Transport and Storage
This EPT15H electric pallet truck must be placed in a horizontal position during
transport and storage to prevent oil spillage.
During storage, it should be kept clean to avoid moisture and harsh climate. The
ambient temperature must not exceed 40℃ If the battery is not used for a long time,
it should be recharged at a proper time.
8 . General Troubleshooting
Fault Possible Fault Cause Solution
6. Maintenance
6.1 Routine maintenance
To Next Page
Loading...