$TäAl.TH
Charging the cleaner
1. Insert the drying tray into the charging station as follows.
2. Place the charging station near the wall,plug the DC power socket of the adapter into the DCpower socket
of the charging station, and then plug the adapter into the power socket.
3. Charging:
A). Put the cleaner on the charging station and insert the adapter, then start charging.
B). Removethe Li-ion battery pack from the main body and charge it directly.
NOTE: Please charge the cleaner for 12 hours for the first time.
Please ensure the 6 hours fully charged for max running time.
Cleaning Floor with the Cleaner
1. Check the Handle, the clean water tank, the dirty water tank, the Li-ion battery pack, the roller brush,
make sure all of them are installed correctly and tightly.
www.altonindustries.com 10
To Next Page
Loading...