$TäAl.TH
2. Press the switch button on the handle to turn on the cleaner. Press the Eco/Max mode button to switch
the suction power.
Important Tips:
Switch Button
Eco/Max Mode
Spray Button
• Please choose the hard roller brush for areas with a short rug.
• Please DO NOT use cleaner in the delicate rugs, silk, or similar floors.
• Please DO NOT SPRAY on the rugs.
3. There will be Voice Assistance providing operation support. This function can be
switched off by pressing the voice switch button.
Voice Switch
4. Hold the spray button for 8 seconds to prime the cleaning water/solutions before each use. Spray the
water according to your personal use during the cleaning.
5. Hold the handle and pull the cleaner forward and backward to clean your floors.
6. The angle range of handle tilt must be within 60.5degree(up and down), please do not shake it in use.
60.50
Backward
forward
Important Tips:
7. Please clean the dirty water tank after each use of cleaning.
• Please DO NOT run over the edges of the rugs.
• The dirty Water Tank must be cleaned as soon as the cleaning work finished, or it will be stinky.
• DO NOT turn the main body over before cleaning the dirty water tank, or the dirty water will flow
into the vacuum motor and damage cleaner.
• Please clean and dry the HEPA and Fillter after each use.
info@altonindustries.com
11
To Next Page
Loading...