15
Problem Reason Suggestion
LED does not shine after
plugged in
∙ No power
∙ Fuse failed
∙ Plugged in correctly?
∙ Check the fuse
Plate does note heat any-
more
∙ Timer run out ∙ Rest the timer
Error Code “E1” ∙ Temperature inside the
device is too high
∙ Ventilation does not
work
∙ Is the air intake
blocked?
∙ Let the device cool
down
∙ Contact service
Error code “E2” ∙ Overheating of glass
plate
∙ Sensor defect
∙ Let the device cool
down
∙ Contact service
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the envi-
ronment or human health from uncontrolled waste disposal, recycle it re-
sponsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental safe
recycling.
Packaging disposal: Do not throw away the package materials. Please put it in the
recycling bin.
Gift box: Paper, should be put to the old paper collection point.
Plastic packaging material and foils should be collected in the spe-
cial collection containers.
Service and Repair:
If the appliance must be repaired, please get in touch with your trader or with the
manufacturer:
STEBA Elektrogeräte GmbH & Co KG
Pointstr. 2, 96129 Strullendorf / Germany
Distribution-Tel.: 09543 / 449-17 / -18,
Service-Tel.: 09543 / 449-44, Fax: 09543 / 449-19
e-Mail: elektro@steba.com Internet: http://www.steba.com
To Next Page
Loading...
