What to do if Steba IK 75 Hob shows error code E0?
If the Steba Hob displays error code E0, it indicates an issue with the cookware. First, check the cookware to ensure it is suitable for induction cooking. If the error persists, let the device cool down completely before restarting it.
What to do if Steba IK 75 Hob shows error code E1?
If the Steba Hob displays error code E1, this indicates an internal overheat. Allow the device to cool down completely, and then restart it.
What to do if Steba Hob shows error code E2?
If the Steba Hob shows error code E2, it means the pot temperature is too high. Remove the pot from the hob and allow it to cool down before restarting the device.
What to do if Steba IK 75 shows error code E3?
If the Steba Hob displays error code E3, it indicates an unusual voltage. Let the device cool down, then restart it.
Why does my Steba IK 75 Hob beep and not heat?
If your Steba Hob is beeping but not heating, it could be due to: 1. The pot not being centered on the plate, ensure that the pot has a minimum diameter of 12cm. 2. The pot not being suitable for induction. Use cookware that is compatible with induction cooking.
How to fix a Steba IK 75 Hob that won't turn on?
If your Steba Hob doesn't light up after plugging it in, there could be a couple of reasons: * There may be no power. Check that the plug is correctly plugged in. * Too many devices might be using one power cord. Check the fuse.
To Next Page
General
