EasyManua.ls Logo

Steba IK 200 - How to Clean

Steba IK 200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Do not carry the unit when the pot or the pan is on it.
Do not use the device if unsupervised. Oil and fat can
catch fire if they get too hot.
Do not place near objects which are affected by magnet. (e.g.
automatic-banking cards).
Unplug the device after every use (not if built-in!)
Attention!
Device gets hot!
Risk of burns!
While using the device, the surface can get very hot. Place the
device with a distance of at least 70 cm to burnable materials
(e.g. curtains).
How to Clean
Disconnect plug and wait until it is cooled down. Clean after
each use.
If the pots/pans are used without being cleaned, discoloration
or cooked on stains may be caused.
Do not use petrol, thinner, scrubbing brush or polishing power
to clean the induction cooker.
Wipe using dish washing agent and damp cloth.
Use vacuum cleaner to suck up dirt from the air intake and ex-
haust vent.
Never run water over the unit. (water gets inside may cause
malfunction).
Usuage

Related product manuals