Steba SB2 - Page 13

13
Usage of the blender
1. Place the sport bottle on a flat surface , open the bottle ,
2. Fill the bottle with your favorite ingredients , all the ingredient must be filled below the
bottle max level mark,
3. Fasten the blade base on the open end of the bottle ,
4. Turn the bottle upside down , put the bottle and blade base together on the blender base,
ensure the three micro switch block in right position ,
5. Press the bottle down in the base ,
6. To lock the bottle in the base for hands-free operation , turn the bottle clockwise in the
base ,
7. Turn the knob switch to “1 or 2 ” position, then the blender will start to work.
8. Either turn the knob switch to “off” position or unlock the bottle from the base , the
blender will stop .
9. Turn the switch knob to “pulse ”position to blend the stuck.
Usage of the blender
1. Place the sport bottle on a flat surface , open the bottle ,
2. Fill the bottle with your favorite ingredients , all the ingredient must be filled below the
bottle max level mark,
3. Fasten the blade base on the open end of the bottle ,
4. Turn the bottle upside down , put the bottle and blade base together on the blender base,
ensure the three micro switch block in right position ,
5. Press the bottle down in the base ,
6. To lock the bottle in the base for hands-free operation , turn the bottle clockwise in the
base ,
7. Turn the knob switch to “1 or 2 ” position, then the blender will start to work.
8. Either turn the knob switch to “off” position or unlock the bottle from the base , the
blender will stop .
9. Turn the switch knob to “pulse ”position to blend the stuck.
1. Lid
2. Jar
3. Blades
4. Blade part
5. Motor part
6. Switch
7. To go bottle