EasyManua.ls Logo

Steba VT 3 - Cleaning and Maintainance; Working Place

Steba VT 3
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
The manufacturer is not liable for damage occurred by using
the apliance in another way than described or if a mistake in
operating has been made
To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
The appliance is not intended to be operated by means of an
external timer or separate remote control system.
Do not direct the air flow from the device at naked flames
(e.g. fireplaces, candles etc.). Do not cover the intake or
the outlet.
Safety instructions when using the device:
Always connect the device to a safety socket
Do not use the device unless it is fully assembled.
Route connecting cable in such a way as to avoid unintentional
contact or pulling during operation.
Unplug device from socket before moving its location.
Disconnect mains plug after use and before cleaning.
Cleaning and maintainance:
Unplug the device.
Never immerse the device in water!
Use a humid cloth with a little bit of detergent to clean it.
Clean dusty ventilation grilles with a vacuum cleaner.
Working place:
Place this device on a even and stable surface. Do not place the device near
objects that may be sucked in (such as curtains)
Do not place the device directly in front of people or animals.
For your health’s sake, please select the correct air speed.

Related product manuals