How to troubleshoot a Steel-Line Garage Door Opener that doesn't work from either door?
If your Steel-Line Garage Door Opener doesn't work from either the door control or the remote, first check the fuse box or circuit breaker. If that's not the issue, check the plug and contact an electrician if the power point is faulty.
What to do if my Steel-Line SD800 works from the door control but not the remote?
If your Steel-Line Garage Door Opener operates from the door control but not from the remote, try replacing the batteries in the remote. If that doesn't work, follow the procedure to recode your hand transmitter.
What to do if my Steel-Line SD800 door stops but doesn't close completely?
If your Steel-Line Garage Door Opener door stops but does not close completely, repeat programming travel limits and the safety reverse test.
Why does my Steel-Line SD800 Garage Door Opener remote have a short range?
If your Steel-Line Garage Door Opener remote has a short range, the issue may be due to environmental factors. A metal garage door, foil insulation, or metal side walls can reduce the transmitter range. You can also try replacing the batteries in the remote or changing the location of the remote control in your car.
What to do if my Steel-Line Garage Door Opener opens and closes by itself?
If your Steel-Line Garage Door Opener opens and closes by itself, check to ensure that the remote push button is not stuck on. You may also need to delete all transmitter codes and reprogram each remote to the opener.
What if my Steel-Line Garage Door Opener runs, but the carriage doesn't move?
If your Steel-Line Garage Door Opener runs, but the carriage does not move, check that the carriage is not disengaged from the opener. If it is disengaged, operate the opener to re-engage the trolley.
Why is my Steel-Line Garage Door Opener straining during operation?
If your Steel-Line Garage Door Opener strains during operation, the door may be unbalanced or have a broken spring. Close the door and disengage the carriage to test the operation manually. If the problem persists, call a garage door professional to correct the issue.
What to do if my Steel-Line SD800 Garage Door Opener won't activate due to a power failure?
If your Steel-Line Garage Door Opener will not activate due to a power failure, pull the manual release handle/rope down to disconnect the trolley and operate the door manually until power is restored. When power is restored, re-engage the trolley.
Instructions for assembling the rail and trolley mechanism for the opener.
Steps for attaching door arms and securing the rail to the opener using brackets.
Guidance on mounting the lintel or ceiling bracket for the opener installation.
Procedure for connecting the rail to the bracket and hanging the opener unit.
Procedure for setting the door's open and closed travel limits.
General| Manufacturer | Steel-Line |
|---|---|
| Category | Garage Door Opener |
| Model | SD800 |
| DC Motor | Yes |
| Safety Reversing System | Yes |
| Soft Start/Stop | Yes |
| Lifetime Motor Warranty | Yes |
| Remote Control | Yes |
| Security | Rolling Code |
To Next Page
