To Next PageTo Next Page
Need help?Do you have a question about the Steel-Line ST50EVOC and is the answer not in the manual?
Emphasizes the importance of reading and following all safety instructions for safe operation.
Test the door's balance and check for binding or sticking before installation.
Details specifications for residential sectional doors with curved tracks.
Lists all components and hardware provided in the opener package.
Provides details on available rail lengths and associated dimensions for sectional doors.
Lists all tools required for the installation process.
Lists all screws, bolts, pins, and other hardware provided with the opener.
Visual guide showing how all components are assembled and installed.
Explains the terminal block for connecting external accessories like push buttons and IR beams.
Details the functions of the control panel buttons (S, P, +, -) and status LEDs.
Step-by-step guide to join the three sections of the segmented rail.
Instructions on how to tension the belt or chain, avoiding over-tightening.
Details on attaching the rail assembly to the opener powerhead using brackets and screws.
Guides on how to mark and position the lintel bracket on the wall or ceiling for optimal alignment.
Provides instructions for both wall and ceiling mounting of the lintel bracket.
How to connect the rail assembly to the lintel bracket using a clevis pin and R-clip.
Instructions for positioning the opener and rail, using a spacer for correct distance.
Details on how to hang the opener unit using ceiling brackets or hanging strips.
Guidelines for securely mounting the door bracket to the garage door frame or support.
Steps to attach the straight and curved door arms to the trolley and door bracket.
Explains how to disengage and re-engage the door from the opener using the manual release cord.
Guide to setting the door's full open and close positions using the control panel buttons.
How the opener automatically sets the motor force for safe operation after limits are set.
Instructions on testing the safety reverse system with a 40mm obstacle and troubleshooting if needed.
Steps for mounting and wiring the IR beam sensors to prevent door closing on obstructions.
Instructions for mounting the wireless wall button, ensuring proper placement.
Guidance on where to place the provided warning and service labels for user safety.
How to add new remote controls or set/change the keyless entry PIN.
Explains how to operate the opener using various devices and its response to commands.
Recommendations for monthly checks and yearly lubrication for optimal opener performance.
Instructions on how to safely replace batteries in the remote transmitters.
Details various compatible accessories like remote controls, keypads, and safety systems.
Lists key technical details including voltage, force, power, motor type, and dimensions.
Provides troubleshooting steps for common problems like no operation, remote issues, or door stopping.
Outlines the warranty period, coverage, exclusions, and conditions for the garage door opener.
General| Brand | Steel-Line |
|---|---|
| Model | ST50EVOC |
| Category | Garage Door Opener |
| Language | English |
