Steelcase Answer Modular Power

To Next Page

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

2014 Steelcase Inc.

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

Answer

Modular Power

Standard Power In

Feed - Floor

Receptacle Covers

New York Power In

Feed - Floor

Pass Thru Power

Power Kits

Change of Height

Harness

NOTE: Unused modular electrical

connector openings are not required

to be capped.

NOTE: The electrician can cut conduit

and wire to length if needed.

Page 1 of 10

939504633 Rev Y

Risk of Fire or Electric Shock

• All electrical installations should be performed by a qualified person in

accordance with codes and regulations applicable at the installation site.

Circuits should be checked for proper voltages. All sources of power

supply must be disconnected prior to any servicing or installation.

WARNING

Multipurpose Power

In Feed

Main Page

Need help?

Do you have a question about the Steelcase Answer Modular Power and is the answer not in the manual?

Summary

Multipurpose Power Solutions

Multipurpose Power In Feed Strain Relief Installation

Installing a strain relief bracket for multipurpose power feeds.

Steelcase Change of Height Harness

Change of Height Harness Installation Steps

Steps for routing and connecting the change of height harness.

Steelcase Power Kits

Power Kit Installation Procedure

Detailed instructions for installing the Steelcase power kit.

Receptacle Covers and Templates

Receptacle Installation and Template Usage

Installing receptacles using templates for accurate placement.

New York Power In Feed - Floor

New York Power In Feed Floor Installation

Steps for connecting the New York power infeed from the floor.

Standard Power In Feed - Floor

Standard Power In Feed Floor Installation

Installing standard power infeed from the floor with safety guidance.

Pass Thru Power Solutions

Pass Thru Power Harness Installation

Feeding and connecting the pass-thru power harness between panels.

Wiring Schematics and Electrical Data