SteelSeries ARCTIS PRO WIRELESS User Manual

Arctis Pro Wireless (Xbox)
The Arctis Pro Wireless will work with Xbox One! The issue is that Xbox does not support
standard USB audio, so getting chat to work requires a different setup. Here’s how to do it:
 Connect the optical audio cable from the Xbox’s S/PDIF jack to the GameDAC. This
supplies your game audio (including surround sound).
 In your Xbox go to Settings -> Display and sound -> Audio Output
1. Set the Optical audio to ‘Bitstream out’, and the Bitstream format to ‘Dolby Digital’
2. Connect the USB audio cable from the GameDAC to the Xbox or to a nearby PC if you
would like to use that for chat (see below)

SteelSeries ARCTIS PRO WIRELESS Specifications

General

Driver Type	Neodymium
Driver Size	40mm
Frequency Response	10–40, 000 Hz
Microphone Type	Retractable Boom
Microphone Frequency Response	100–10, 000 Hz
Impedance	32 Ohm
Microphone Sensitivity	-38 dBV/Pa
Sensitivity	102 dB SPL
Wireless Range	40 ft / 12 m
Battery Life	20 hours per battery
Connectivity	Wireless
Compatibility	PC, PlayStation, Mobile

Summary

Arctis Pro Wireless Xbox Connectivity

Configure Xbox Audio Output Settings

Set Optical audio to 'Bitstream out' and Bitstream format to 'Dolby Digital' for game audio on Xbox.

Arctis Pro Wireless Volume Adjustment

Disable Volume Limiter for Maximum Output

Defeat the volume limiter setting on the transmitter base station to use its full power.

Arctis Pro Wireless PC Microphone Issues

Optimize Microphone Positioning for Clarity

Position the microphone correctly for optimal voice capture and noise cancellation.

Set PC Microphone Default Format

Ensure the PC's default microphone format is set to 48000 Hz in sound settings.