7
1 While the controller is on and connected to another device,
simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds.
2 The LED pattern change will indicate that the controller switched from
wired mode to wireless search mode.
PAIRING TO A NEW DEVICE
1 Press the Wireless Pairing Button (9) for 3 seconds.
2 All four Player Indicator LEDs (3) will ash to indicate that your
Stratus+ is in pairing mode.
3 Open the Bluetooth menu on your mobile device and make sure it is
scanning for available devices. Find “SteelSeries Stratus+” and press
to connect.
RECONNECTING TO AN EXISTING DEVICE
1 Turn on your Stratus+ by pressing and holding the Home Button (6).
2 During the connecting sequence, the Player Indicator LEDs (3) will
cycle from 1 to 4. The Stratus+ will automatically reconnect to the
most recent device when powered on.
3 If the Stratus+ doesn’t automatically connect to the device, open up
the Bluetooth menu on the desired device and nd the “SteelSeries
Stratus+” in available devices. Press to connect.
Note: If you want to connect to a previously paired device, simply select
the Stratus+ from the Bluetooth menu on the Android device.
More detailed product information at
steelseries.com/stratus-plus
To Next Page
Loading...
Need help?
General
